Categories
World Tech

How to solve the “Service Control Manager error 7001” problem

This is a kind of error that was a problem to a number of computer users from around the world since they have encountered the Service Control Manager error 7001 message, It is a particular message that appears when you try to start the service, which is the Microsoft Windows Error Reporting Service. This message is usually shown as: “Service Control Manager error 7001 (The service did not respond to the start or control request in a timely fashion.)” You can find and fix this error in many ways. One way, is the use of a program known as Service Control Manager. This program can be found in the Control Panel menu. After this, open the Service Control Manager, and click on the little arrow, and then choose the “Start

The “Service Control Manager error 7001” has been seen on a lot of different devices, but the issue seems to be more prevalent on Windows 10 machines. The error is caused when COMCTL32.DLL is incorrectly loaded, which will then cause the installation to fail. This article will explain what that error means and how to solve it.

This is an old problem, but still an open one. The reason it doesn’t get resolved is that Microsoft doesn’t provide a good solution (at least not yet). Until they do, here is a work around.

word-image-8751 RECOMMENDED: Click here to fix Windows errors and optimize system performance. Some users have reported an error with Service Control Manager – Error 7001 in the Event Viewer. This error is a system problem with the Service Control Manager resource. On the General tab of the event properties, you can view detailed information about the error and find out its direct causes. In fact, error 7001 in the Service Control Manager can also be caused by other factors. If the event ID 7001 unfortunately occurs on your Windows computer, you can try the following solutions. You may not need to try them all. Continue the list until you have solved the problem.

What causes Service Control Manager error 7001?

word-image-8752 It turns out that there are several culprits for this particular problem. Here is a short list of scripts that can cause this particular error in the event viewer: Persons with disabilities Compulsory services : To ensure that the computer navigation service calls all dependencies, it turns out that several mandatory services must be enabled. If this is not the case, you can solve the problem by activating some basic services in the services view. No dependence on network discovery: If the event IDs you find in the Event Viewer are related to a problem with the network search function, you can fix the problem by running some commands at the extended CMD prompt and clearing the PeerNetworking folder. Recent inconsistent software change: According to some affected users, this problem may also occur after a major system change, such as. For example, after installing or updating drivers, or after an unexpected computer shutdown resulting in some operating system data becoming corrupted. In this case, the panacea is to use the system recovery utility to restore the performance of the computer. Corruption of system files : In more serious circumstances, this Event Viewer log may be generated if your system has been affected by corruption of the underlying system files. If this scenario applies, the only way to update all your Windows files is to perform a clean install or an on-site restore.

Correct Service Control Manager error 7001

May 2021 update:

We now recommend that you use this tool to fix the error. Moreover, this utility repairs common computer errors, protects you from file loss, malware and hardware malfunctions, and optimizes your PC for maximum performance. With this program you can quickly solve PC problems and prevent further problems:

  • Step 1: Download the PC recovery and optimization tool (Windows 10, 8, 7, XP, Vista – Microsoft Gold Certified).
  • Step Two: Click Start Scan to detect problems in the Windows registry that may be causing problems with your PC.
  • Step Three: Click Repair All to fix all issues.

word-image-3653 word-image-8753

Repair network discovery dependencies

If your system’s network search component uses dependencies, those are probably the cause. In this case, the easiest way to solve the problem is to delete the PeerNetworking folder to remove the corruption error. Don’t worry, this process is not as complicated as it sounds. Here’s what you need to do:

  1. Type Command Prompt in the search bar and click Run as Administrator to run Command Prompt with administrator privileges.
  2. In the command prompt window, type the following command and press Enter. This adds and enables the services needed for network discovery.
  3. net localgroup administrators localservice /add
  4. net localgroup administrators service /add
  5. Then open File Explorer and navigate to the location shown below. If you can’t find the AppData folder, click View on the Ribbon menu and check the Hidden Items box.
  6. C:WindowsServiceProfilesLocalServiceAppDataRoamingPeerNetworking
  7. Delete the entire contents of the PeerNetworking folder and restart the computer.

If Service Control Manager error 7001 is caused by network discovery dependencies, the above procedure will help you resolve it as soon as possible.

Performing a system restore

Improper updates and installations are another common cause of system failures and errors, such as problems with the Service Control Manager. If the problem occurs immediately after installing the latest system update or a new driver, the cause of the problem may be an error in the newly installed files. Fortunately, you can always undo the changes you’ve made to Windows and restore the system to its previous error-free state. Our operating system automatically creates recovery snapshots before critical operations are performed. So if you want to revert to the previous version in the future, you can easily do so. Just run a system restore and you won’t see any more error messages once the process is complete!

Add the services you need

For some Windows components and services to work, all relevant services must be enabled and working as intended. Failure of any of the services may result in system crashes and errors such as Service Control Manager error 7001. If the error in question occurs, first ensure that all services, including RPC Endpoint Mapper, Security Accounts Manager, Server, DCOM Server Process Launcher, and Remote Procedure Call, are enabled. If they are disabled, you must enable them to solve the problem. Here’s what you need to know:

  1. Open the Run dialog box by pressing the Windows + R keys simultaneously.
  2. Type services.MSC in the text box and press Enter. The Services window opens.
  3. Scroll down the services window and locate the DCOM server process launcher.
  4. When you find it, right click on it and select Properties.
  5. Click the General tab and select Automatic from the drop-down menu under Run. Also make sure that the service status is active.
  6. Finally, click Apply to save your changes.
  7. Now repeat the same process with the services listed below.
  • Comparison of RPC evaluation criteria
  • Remote procedure call (RPC)
  • Security Account Manager
  • Server

You can then restart the computer and repeat the steps that caused Service Control Manager 7001 to fail on your computer. If the problem is caused by any of the above services, follow the steps above to resolve the issue. If the error persists, continue with the following method.

Using the Device Manager

Some users have found that the root cause of the problem is the poor performance of the server itself. They were able to solve the problem by making changes to Windows Device Manager. However, this method is only suitable for users using the NetBIOS over TCP IP driver on their device. Here’s how:

  1. Open the Device Manager and click on View.
  2. Select the Show hidden devices check box.
  3. Now find the drivers that don’t connect to the computer and double-click them.
  4. Then double click on NetBIOS over Tcpip and select Use this device (enable) under Use device.
  5. Now try to accomplish the desired task. Let’s hope the problem doesn’t reoccur.

RECOMMENDED: Click here to fix Windows errors and optimize system performance.

frequently asked questions

word-image-8754Service Control Manager error 7001 is a non-critical error that appears in Windows 7, Windows 8 and Windows 10. It indicates that the Windows Service Control Manager failed to start. It does not affect the operation of Windows, but it can be annoying.. Read more about event id 7001 network connectivity assistant and let us know what you think.

Frequently Asked Questions

How do I fix service control manager error?

A common issue that some Windows 7 users run into is that a system error is reported when trying to open a service from the Windows Service Control Manager. This can be frustrating for the user, since they cannot get a proper fix. Some solutions may claim to fix the issue, but they actually cause worse problems than the initial issue. Here is what to do to fix this issue. If you are getting a Service Control Manager error 7001, it means that Windows cannot connect to the Network. The reason for this error lies in the Service Control Manager. As the name suggests, the Service Control Manager is a service that manages the services on your PC. The Service Control Manager or SCM is designed to allow your PC to talk to other PCs and to exchange information and data with other PCs.

What causes Event ID 7001?

A few weeks ago, I reported on a Windows Event Log showing a Service Control Manager error which I found peculiar in the Windows Windows 8.1 Preview. I found this error during my time troubleshooting a Windows 8.1 Preview caused by an app. Event ID 7001 is a generic error code that appears in Event Viewer when a service fails. It is also referred to as a “Service Control Manager error” or “Service Control Manager (SCM) error”. This is often caused by a SCM application suppressing the event. This can occur with any service that has a dedicated service control manager implemented. This can include:

What is Event ID 7001 winlogon?

It is highly likely that you are having problems with Event ID 7001 that is winlogon. You may have been having the problem for a long time, and lately, it has been getting worse. The symptoms of the problem are that the computer is not responding (not responding at all or starts with a service, or not responding for more than a few minutes at a time), the computer becomes unresponsive (hangs, freezes, or crashes), the computer does not respond to the user request (unresponsive at the time of the user request). It is important to note that Event ID 7001 is a service error. It is a specific error that does not generate any error code, just a generic error message. This is an error that Windows has been known to cause a strange problem where you can’t log on to your computer when using a computer that is connected to a monitor. If you need to connect a computer to a computer or laptop, event ID 7001 winlogon may be preventing you from logging on to your computer.

Related Tags:

Feedback,service control manager error 7000event id 7001 service control managerevent id: 7001 vssrenderer error 7001event id 7001 – winlogonevent 7001 service control manager windows 10,People also search for,Privacy settings,How Search works,service control manager error 7000,event id 7001 service control manager,event 7001 service control manager windows 10,event id 7001 network connectivity assistant,event id: 7001 vss,renderer error 7001,windows 7 event id 7001 service control manager,event id 7001 – winlogon

Leave a Reply

Your email address will not be published. Required fields are marked *